Plants absorb all needed elements from water and soil. A system, in which all nutrients are provided to the plants by water, is called hydroponics system. There are two methods in hydroponics gardening. First is an active hydroponics gardening system, and second is Passive gardening system.
Both methods are good for indoor hydroponics gardening. But the success of the method depends on your strategy. It means which method you use and how will be your management skills you apply to it. It is an attempt to make available the information about how to set a Passive Hydroponics Garden.
Material for Passive Garden:
A Passive Hydroponic Gardening System requires following items and materials. Plant container with drainage whole, moisturized soil, hydroponic absorption wick, wooden table with a center whole, plastic buckets etc. material can use in Passive Garden. Make sure that all the material is enough and will proper for everything. For instance table should be slightly smaller than the plant containers. Or peat moss should be good.
Garden Setup:
Using wick system in your garden is very good idea. It is easy and simple to fulfill your desire. Set hydroponic wick into growing container. Before setting wick decide which side do you want to use or which side should be useful for your convenient.
Follow the lines of container and bottom of the container through drainage holes. Size of container should be six to eight inches above reservoir buckets and that should be provide proper nutrients to the container. Hydroponic wick should be long and adequate to reach reservoir. Then fill up containers with soil, water and other required material up to two inches bellow the container rim.
Put the container on proper place according to wick system. Before placing container arrange table and then put the container near the table. Set two other buckets underneath the table so that the water will fall into the reservoir container. Reservoir container and plant container will be placed on proper distance.
Arrange drainage system in a way that water should be reach to both containers. And make sure that you will have fill up the container with water every day whenever required. Then put a plant in a container and add other nutrients, solution with plants. It is easy to maintain and operate every thing.
Passive method is simpler than the active method. Active method requires more concentration. The passive method is not as complicated as the active method because the passive technique requires less property and material.
![[Valid RSS feed]](/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
